How to Set-up Device

Scenario 01:

Installing Audra in your Home newly or replacing your current Wi-Fi router

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (Included in box) between your Modem’s LAN port and Audra’s WAN
      port
    • Connect Audra’s Power Cable (included in box) to electricity Supply
  • Connect to Audra through Wi-Fi or LAN.
    *Use default password for Wi-Fi:
    audra123
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 02:

Keeping both Audra and your current Wi-Fi router active altogether

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (included in box) between your Existing Router’s LAN port and
      Audra’s
      WAN port
    • Connect Audra’s Power Cable (included in box) to electricity supply
  • Connect to Audra through Wi-Fi or LAN.
    *Use default password for Wi-Fi:
    audra123
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 03:

Keeping both Audra and your current modem with Wi-Fi router active altogether

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (included in box) between your Existing Router’s LAN port and
      Audra’s
      WAN port
    • Connect Audra’s Power Cable (included in box) to electricity supply
  • Connect to Audra through Wi-Fi or LAN.
    *Use default password for Wi-Fi:
    audra123
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 04:

Keeping both Audra and Triple Play device active altogether

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (Included in box) between your Triple Play Device’s LAN port and
      Audra’s WAN port
    • Connect Audra’s Power Cable (included in box) to electricity Supply
  • Connect to Audra through Wi-Fi or LAN.
    *Use default password for Wi-Fi:
    audra123
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 01:

Installing Audra between your modem and Wi-Fi router

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (Included in box) between your Modem’s LAN port and Audra’s WAN
      port
    • Connect Ethernet Cable from LAN Port of Audra Device to LAN port of Wifi Access Point
    • Connect Audra’s Power Cable (included in box) to electricity Supply
  • Connect to Audra through LAN.
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 02:

Keeping both Audra and your current Wi-Fi router active altogether but Wi-Fi routing through the
Access Points after Audra

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (Included in box) between your existing router’s LAN port and
      Audra’s
      WAN port
    • Connect Ethernet Cable from LAN Port of Audra Device to LAN port of Wi-fi Access Point
    • Connect Audra’s Power Cable (included in box) to electricity Supply
  • Connect to Audra through LAN.
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 03:

Keeping both Audra and your current Wi-Fi router active altogether and routing through both the
router before Audra and Access Points after Audra

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (Included in box) between your Existing Router’s LAN port and
      Audra’s
      WAN port
    • Connect Ethernet Cable from LAN Port of Audra Device to LAN port of Wi-fi Access Point
    • Connect Audra’s Power Cable (included in box) to electricity Supply
  • Connect to Audra through LAN.
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end

Scenario 04:

Keeping both Audra and your current Triple Play modem with Wi-Fi router active altogether and
routing through both the router before Audra and Access Points after Audra

  • Please connect your Audra device as shown in the diagram below

    • Connect ethernet cable (Included in box) between your Existing Router’s LAN port and
      Audra’s
      WAN port
    • Connect Ethernet Cable from LAN Port of Audra Device to LAN port of Wi-fi Access Point
    • Connect Audra’s Power Cable (included in box) to electricity Supply
  • Connect to Audra through LAN.
  • Open web-browser and type in: audra.local to access connection setup page
  • In connection setup page, select ISP
  • Select your Network Type (please ask your ISP if you don’t have the information)
  • WAN settings
  • Let Audra guide you till the end